Top
picotest Instrument Corplogo
HOMESITEMAP繁體中文
  picotest Instrument Corp,company introduced picotest Instrument Corp,Product picotest Instrument Corp,technology picotest Instrument Corp,News
   
  FAQ Home> Supports> FAQ_Digital Multimeter
  Digital Multimeter
1.How to show 50000 readings/sec from M3510A?
2.How to show 2000 readings/sec from M3500A?
3.How do I convert the voltage??
4.How to change the power line fuse?
5.What kind of socket does your M3500A thermocouple adapter provide?
6.What are the different between 2-wire and 4wire resistance measurements?
7.What is the difference between function "STEP" and "SCAN"?
8.Does it matter if I did not fix screws on the Scanner Card when I use it?
9.How many devices can be connected through USB on PICOTEST M3500A?
10.Can I transfer the measured data from M3500A to PC without?"Microsoft Office" ?
11.What sort of PC is required for the software control of the M3500A?
12.Do we need M3500A-opt02 adaptor for each input that has thermocouples connecter?
13.Is the RTD probe connection 3 wire or 4 wire?
14.How to implement current measurements through M3500-opt01 Multi-point Scanner Card?
15.How to use Thermocouple measurement?
16.Regarding the M3500A, what is the measurement speed of USBTMC?
17.What is USBTMC?
18.Could you provide M3500A Comparison sheet?
19.How to remote the STEP of 10 channels at same speed as when local?
20.Why did the instrument measure the correct value of temperature at the beginning, but the value become unstable after a few minutes?
21.If install PT-link (Ver2.0) and connect M3500A (Ver 02.-01-01-04) through USB, a message appears to the effect that necessary software is not installed. After that, we turn off and then on the M3500A, no such message pops up , but the PT-Link cannot recognize the M3500A?
22.How to use the M3500A and Power supply as substitute for the Source Meter to measure IV Curve?
 
Download
FAQ
Contact Us
 
 
 
 
©2012-20015 PICOTEST Corp all rights reserved.